Silvercrest SHFD 2150 A1 - Page 14

12 GB
Cleaning and storage
 The product shall not be
exposed to any dripping or
splashing water.
 Disconnect the product from the
power outlet during periods of
disuse and before cleaning.
 Refer to the “Cleaning and
care” section for instructions on
how to clean the product.
 Before first use
 Remove all the packaging materials.
 Clean the product (see “Cleaning and care”).
 Operation
Indicator Status Press (Yes/No) Function
Indicator with circle
(button)
[] [] [] [] [] []
[] [] [] []
Lights up Yes
Press once to activate the
function. 1 beep sounds.
Flashes Yes
The corresponding function is
activated. Press and hold for
3 seconds to cancel the function.
1 beep sounds.
Menu selection display
[] []
Lights up No
The corresponding function is
selected.
Flashes No
The corresponding function is
activated.
[]
Lights up No
Heating element and fan are
operating.
Flashes No Only fan is operating.
[] / []
Lights up No
The corresponding function is
operating.
NOTES:
 Under the following circumstances the
product switches to standby mode:
–
[] is pressed.
– No button is pressed for 60 seconds in
program selection mode.
 You can remove the bowl
[5] at any time,
even during cooking.
– The heating element and fan switch off
when the bowl
[5] is removed.
– When the bowl
[5] is replaced, the product
returns automatically to the previous
operating mode.