Silvercrest SHSS 16 A1 User Manual

SHSS 16 A1
GB
│
IE
│
NI
│
CY
│
9 ■
5) To replace the rotary brush t, first push the
broad end onto the drive shaft so that the
rotary brush t hooks into place.
6) Then, push the other end into the mount so that
the rotary brush t sits straight in the floor
nozzle.
7) Replace the cover plate and fasten it firmly
intoplace by pushing the catch towards the
symbol (fig. 4).
Fig. 4
Storage
■ When you are not using the appliance, place
iton the cradle g.
■ Place the accessories on the accessory
holderss/d:
– Place the crevice tool i and the upholstery
nozzle ointo the holders s/d.
– Place the brush attachment u onto the
upper part of the crevice tool i.
■ Store the appliance in a dust-free and dry
location.
Troubleshooting
The appliance is not working.
■ The battery is not charged.
♦ Connect the appliance to the charger p.
■ The appliance is defective.
♦ Contact the Customer Service department.
The appliance is running but hardly
sucking up any dirt.
■ The battery is not sufficiently charged.
♦ Connect the appliance to the charger p.
■ The dirt container 8 is full.
♦ Empty the dirt container 8.
■ The HEPA filter 6 is blocked.
♦ Clean the HEPA filter 6.
The appliance will not charge.
■ The charger p is not correctly connected to
the socket/mains plug.
♦ Check the connections of the charger p.
■ The charger p is defective.
♦ Contact the Customer Service department.

Silvercrest SHSS 16 A1 Specifications

General

Brand	Silvercrest
Model	SHSS 16 A1
Category	Vacuum Cleaner
Language	English