Why Silvercrest SIKP 2000 B2 does not start cooking?
The Silvercrest Hob might not start the cooking process if there is no cookware on the cooking area or if the cookware is not suitable for induction cooking areas. Ensure that you place suitable cookware on the cooking area.
What does Err mean on my Silvercrest SIKP 2000 B2 display?
The 'Err' message on your Silvercrest Hob display indicates a problem with the cookware. Here's what to check: * Ensure there is suitable cookware on the cooking area. * Make sure the cookware is centered on the cooking area.
Why won't my Silvercrest Hob start cooking?
If your Silvercrest Hob isn't starting the cooking process, there are a couple of things to check: * Make sure there is suitable cookware on the cooking area. * Ensure that the cookware you're using is suitable for induction cooking areas. Refer to the chapter 'Suitable Cookware' for more information.
What does E02 error mean on Silvercrest SIKP 2000 B2 Hob?
If the display 8 of your Silvercrest Hob shows E02, it means the appliance is receiving too much voltage (more than 270 V). Ensure the hob is connected to a properly installed mains power socket with 220-240V, 50 Hz.
What to do if Silvercrest SIKP 2000 B2 Hob display shows E03?
If your Silvercrest Hob displays 'E03', it means there is a short circuit inside the appliance! Immediately disconnect the plug from the mains power socket and contact the Customer Services department!
What does E05 mean on my Silvercrest SIKP 2000 B2 display and what should I do?
If your Silvercrest Hob displays 'E05', it means the appliance is too hot when in power levels mode. To resolve this, disconnect the plug from the mains power socket and wait until the appliance has cooled down.
What does E07 mean on my Silvercrest SIKP 2000 B2 Hob?
If the display 8 of your Silvercrest Hob shows E07, it indicates that the appliance is too hot in Temperature-Mode. To fix this, disconnect the plug from the mains power socket and wait for the appliance to cool down.
What does E02 mean on Silvercrest Hob?
If your Silvercrest Hob shows 'E02' on the display, it indicates that the appliance is receiving too much voltage (greater than 270 V). Check and ensure that the appliance is connected to a properly installed mains power socket with 220 - 240 V , 50 Hz.
Why does my Silvercrest Hob display E01?
If your Silvercrest Hob displays 'E01', it means the appliance is not receiving enough voltage (less than 160 V). Verify that the hob is connected to a properly installed mains power socket with 220-240 V, 50 Hz.
What does E07 mean on Silvercrest SIKP 2000 B2 Hob?
If the display of your Silvercrest Hob shows 'E07', it indicates that the appliance is too hot in Temperature-Mode. To fix this, disconnect the plug from the mains power socket and allow the appliance to cool down.
Precautions against electric shock from cables, plugs, and water immersion.
Caution regarding hot surfaces and supervision requirements for users.
Advisories on preventing fires from overheating, flammable objects, and improper use.
Safety measures before cleaning: unplugging the appliance.
Caution to let the appliance cool down before cleaning to avoid burns.
Addresses issues like appliance not functioning or starting cooking.
General| Brand | Silvercrest |
|---|---|
| Model | SIKP 2000 B2 |
| Category | Hob |
| Language | English |
To Next Page