GB
│
IE
│
NI
│
35 ■
SKC 121 A1
Malfunction Cause The solution
There are loud
operating noises.
You have not removed all the
packaging material.
Check whether you have removed
all the packaging material from the
appliance.
The appliance is not standing
level.
Compensate for any unevenness in
the floor by using the adjustable feet
.
The appliance is too close to
the wall.
Set up the appliance so that it has
a minimum clearance of 5 cm on all
sides.
You receive a
slight shock when
touching the
appliance.
The appliance is not correct-
ly earthed.
Pull out the plug immediately and
make sure the appliance is properly
earthed. If the problem persists,
contact Customer Service.
If the malfunction cannot be corrected with the above suggestions, or if you have determined
that the malfunction may have other causes, please contact our Customer Service.
Appendix
Technical data
Input voltage 220–240 V
~
(AC), 50 Hz
Nominal current 0.8 A
Noise level 41 dB
Refrigerant R600a (16 g)
Climate class N, ST
Heat insulating material Cyclopentane
Energy consumption 0.246 kWh/24 h, 90 kWh/year (±10%)
Storage capacity/Net capacity 121 l
Gross capacity 125 l
Nominal power interior light max 15 W
Protection class 1
All of the parts of this appliance that come
into contact with food are food-safe.
To Next Page
Loading...
Need help?
General
