EasyManua.ls Logo

Silvercrest SKR 3W D4 - Recalling a Preset Station; Presetting Currently Active Station; Sleep Timer; Alarm Setting

Silvercrest SKR 3W D4
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19GB
Presetting currently active
station
You can store up to 60 stations (30 FM and
30 DAB).
Press and hold PRESET [2].
Preset store<#:(Empty)> appears on the
display [4].
Turn SELECT/ENTER/SNOOZE [1] to select
a desired station memory.
Press SELECT/ENTER/SNOOZE [1] to
confirm.
The station is stored. Preset # stored
appears on the display [4].
NOTE: Station memories that are already
occupied will be overwritten without further
notice.
Recalling a preset station
You can recall a previously saved station by
pressing PRESET [2].
Turn SELECT/ENTER/SNOOZE [1] to select
the desired station memory.
Push SELECT/ENTER/SNOOZE [1] to
confirm.
NOTE: Preset Empty is displayed if the
preset number is unoccupied.
Sleep timer
In operation mode:
Press and hold TIMER/SLEEP[9] for approx.
2seconds. Press TIMER/SLEEP repeatedly
to choose the sleep time: Sleep off/
15/30/45/60/90/120 minutes.
After the selected time has elapsed the product
switches into standby mode.
Checking the remaining sleep time: The interval
remaining is shown in the display.
Cancelling the sleep timer: Press and hold
TIMER/SLEEP [9] repeatedly until Sleep off
appears in the display.
Alarm setting
In standby or operation mode, press and hold
MENU/INFO [8] for 2 seconds.
Switch on alarm setting
Turn SELECT/ENTER/SNOOZE [1] to select
<SYSTEM>.
Push SELECT/ENTER/SNOOZE [1] to
confirm.
Turn SELECT/ENTER/SNOOZE [1] to select
<Alarm>.
Push SELECT/ENTER/SNOOZE [1] to select
Alarm 1 or Alarm 2.
Turn SELECT/ENTER/SNOOZE [1] to select
<Alarm on> or <Alarm off>.
Push SELECT/ENTER/SNOOZE [1] to
confirm.
Set alarm setting
Push SELECT/ENTER/SNOOZE [1].
Turn SELECT/ENTER/SNOOZE [1] to set
the hours.
Push SELECT/ENTER/SNOOZE [1] to
confirm.
Turn SELECT/ENTER/SNOOZE [1] to set
the minutes.
Push SELECT/ENTER/SNOOZE [1] to
confirm.
Turn SELECT/ENTER/SNOOZE [1]
to select the alarm duration (options:
15/30/45/60/90 minutes).
Push SELECT/ENTER/SNOOZE [1] to
confirm.
Turn SELECT/ENTER/SNOOZE [1] to select
the alarm sound (options: <Buzzer>, <FM>,
<DAB>).

Table of Contents

Related product manuals