Silvercrest SKV 1200 B2 - Cleaning and Care; Electrical Safety; Cleaning Material Warning; Cleaning Notes

GB
│
IE
│
NI │ 9 ■
SKV 1200 B2
Cleaning and care
DANGER – RISK OF ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
Never immerse the appliance in water or
any other liquid!
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive or aggressive cleaning
materials. These may damage the surfaces.
NOTES
► We recommend cleaning the appliance
directly after use. This makes food residues
easier to remove.
► Processing foods that contain strong pig-
ments, such as carrots, may lead to staining
of the plastic parts. These stains can be
removed using a little cooking oil.
Cleaning the appliance
■ Wipe the appliance with a damp cloth. For
stubborn soiling use a mild detergent on the
cloth. Wipe off any detergent residue using a
cloth moistened with clean water. Then dry the
appliance carefully.
Cleaning the accessories
■ Clean the mixing bowl 6, the lid 9, the cover
of the filling opening 8, the blender lid r with
measuring cup e, the drive protection cover u
and the attachments 0 q w in warm water
with a little detergent.
■ Any residues can be removed with a washing-
up brush. Rinse all parts with warm clean water
and make sure that all parts are dry before
re-using them.
5)
NOTE
► The attachments 0 q w, the lid 9, the
mixing bowl 6, the blender jug C and the
measuring cup e are also dishwasher-safe.
► If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere. This may cause
them to become deformed.
► If possible, place all plastic parts in the top
basket of the dishwasher.
Cleaning the blender
WARNING! RISK OF INJURY!
► Do not touch the blades z with your bare
hands.
■ Clean the blender t and the blender lid r
with measuring cup e in warm water and add
a mild detergent (washing-up liquid). Then rinse
all parts with clean water so that no detergent
residues remain.
■ If this cleaning is not sufficient, you can remove
the blade holder A with the blade z from the
blender jug C:
A
B
C