■ 18 │ GB│IE│NI
SLE 265 B3
Cleaning
CAUTION
Possible damage to the appliance.
► Do not allow any liquids or moisture to get into the appliance.
► To avoid irreparable damage to the appliance, never immerse it in water.
► Always remove the mains plug from the mains power socket before cleaning
the appliance.
► Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing.
► Do not clean the water tank
4
in a dishwasher. Otherwise, it will be
damaged.
♦ If required, wipe the casing with a slightly damp cloth.
♦ Remove the water tank
4
and pour out the water. Dry it thoroughly, both
inside and out, before replacing it.
♦ In order to clean the inside of the water tank
4
, you must remove the lid.
To do this, tip the grip backwards until the pins on the grip line up with the
groove on the water tank
4
. You can now remove the grip by pushing it
on both sides out of the groove (see figure 5).
Fig. 5
♦ Now remove the lid upwards from the water tank
4
.
♦ Assembly is carried out in the reverse order.
♦ We recommend that you clean the water tank
4
regularly every two weeks
to prevent the build-up of mould and bacteria. To do this, fill the water tank
4
with lukewarm water, adding a standard detergent. Rinse repeatedly with
lukewarm water. In addition, disinfection is recommended following clean-
ing. To do this, use a standard, alcohol-based disinfecting agent or high-
proof alcohol. Both substances are completely harmless if rinsed repeatedly
with lukewarm water afterwards.
4
To Next Page
Loading...