EasyManua.ls Logo

Silvercrest SLE 265 B3 - Filter Maintenance; Filter Cleaning Schedule; Filter Removal & Cleaning Process

Silvercrest SLE 265 B3
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GBIENI19
SLE 265 B3
Cleaning and changing the filter
The performance of the appliance also depends upon how clean the filter is. The
carbon filter
8
should be cleaned every 2 weeks and changed every 6 months.
NOTE
You can purchase new carbon filters in almost all shops selling household
goods. The carbon filter mats just need to be cut to size.
Switch the appliance off and pull out the mains plug .
To remove the air inlet grille
6
, there are grips above the grille. Pull the air
inlet grille
6
off backwards.
Vacuum the air inlet grille
6
or clean it with a soft brush.
To remove the plastic frame
7
, carefully remove the retaining tabs around
the frame from the mounts on the appliance.
Now, remove the carbon filter
8
.
Wash the carbon filter
8
in lukewarm water.
Allow the carbon filter
8
to dry completely before re-inserting it in the
appliance.
Assembly is carried out in the reverse order (see fig. 6).
6
7
8
Fig. 6

Table of Contents

Related product manuals