Silvercrest SLE 320 A1

Questions and Answers

L
luiswintersAug 1, 2025
What to do if my Silvercrest Dehumidifier will not switch on?
- G
  gonzalezrobertoAug 1, 2025
  If your Silvercrest Dehumidifier won't switch on, there are several potential causes: * The mains plug may not be properly inserted. Ensure it is fully plugged into the mains power socket. * The mains power socket might not be supplying power. Check the house's mains fuse. * The water tank might be missing or incorrectly inserted. Make sure the water tank is correctly inserted. * The water tank could be full. Empty the water tank and then re-insert it.
T
Taylor RiveraAug 7, 2025
Why is my Silvercrest Dehumidifier not collecting water?
- S
  sheltonshannonAug 7, 2025
  If your Silvercrest Dehumidifier is producing little to no condensate, consider these possibilities: * The air inlet or outlet might be blocked. Check and clear any obstructions from the air inlet and outlet. * Open windows and doors can affect performance. Close the windows and doors in the room. * The dehumidifier might be running in AIR CLEAN mode, which doesn't dehumidify. Select a different program, such as AUTOMATIC MODE.
M
Mason OlsonAug 12, 2025
Why is my Silvercrest SLE 320 A1 Dehumidifier producing no or limited condensate?
- T
  tammy06Aug 12, 2025
  First, check the air inlet and outlet to make sure they are clean and not blocked. Next, close any open windows and doors in the room. Finally, ensure that the appliance is not running in the AIR CLEAN program; if it is, select a different program like AUTOMATIC MODE.
S
Stacy LawrenceAug 18, 2025
Why is the air from my Silvercrest SLE 320 A1 warm?
- M
  Miss Karen Chaney DVMAug 18, 2025
  The warm air is part of the normal heat exchange process of the Silvercrest Dehumidifier.
R
Rachel EstradaAug 25, 2025
Why is the air ejected from my Silvercrest Dehumidifier warm?
- E
  Ethan HoffmanAug 25, 2025
  The warm air is a normal part of the Silvercrest Dehumidifier's heat exchange process.

Summary

Safety

Risk of Electrocution

Risk of fatal injury from contact with live electrical components.

Risk of Electrocution Due to Moisture

Risk of electrocution if appliance contacts water or is used with wet hands.

Risk of Explosion

Do not use in potentially explosive environments with combustible materials.

Risk of Disease

Stored water is unsuitable for drinking; potential health hazards.

Basic Safety Guidelines

General safety rules including checking for visible damage before use.

Initial Operation

Handling and Operation

Switching the Appliance On;Off

Instructions on how to turn the appliance on and off using the standby button.

Operating Status Displays

LED Indicators

Explanation of the meaning of various LED indicators on the control panel.

Display Indicators

Selecting Programmes

Automatic Mode

Target Humidity

Drying Laundry Programme

Air Purification Programme

Cleaning

Cleaning and Changing the Filter

Protection Against Overheating

Troubleshooting

Causes of Malfunction and Fault Rectification

Guide to identifying common faults and their corresponding solutions.

Service

Silvercrest SLE 320 A1 Specifications

General

Model	SLE 320 A1
Power Consumption	320 W
Operating Temperature	5 - 35 °C
Refrigerant	R134a
Operating Temperature Range	5 - 35 °C
Water Tank Capacity	5.5 l
Noise Level	52 dB
Dimensions	35 x 51 x 24.5 cm
Weight	15 kg