How to fix a Silvercrest Dehumidifier that won't turn on?
If your Silvercrest Dehumidifier won't switch on, first ensure the mains plug is properly inserted into the power socket. Then, check your house's mains fuse. Also, make sure the water tank is correctly inserted and not full; empty it if necessary and re-insert it properly.
What to do if my Silvercrest SLE 280 A2 Dehumidifier is not collecting water?
If your Silvercrest Dehumidifier is producing little to no condensate, make sure that the air inlet and outlet are clean and unobstructed. Ensure that windows and doors in the room are closed. Also, check that the appliance is not running in AIR CLEAN mode; switch to a different mode like AUTOMATIC.
Why does my Silvercrest Dehumidifier keep stopping and starting?
The occasional stopping of your Silvercrest Dehumidifier with the fan switching off is normal if the room temperature is below 15°C, which activates the defrosting function, or if the humidity in the room is below 55%.
Why is the air coming out of my Silvercrest SLE 280 A2 warm?
The air ejected from the Silvercrest Dehumidifier being warm is normal. This is due to the heat exchange process.
General| Brand | Silvercrest |
|---|---|
| Model | SLE 280 A2 |
| Category | Dehumidifier |
| Language | English |
Avoid contact with live cables and damaged power cords. Risk of electrocution from moisture.
Do not operate near water, immerse, or handle with wet hands. Disconnect immediately if dropped in water.
Do not use in explosive environments with combustible substances; electrical sparks can ignite dust or fumes.
Stored water is not for drinking. Avoid specific environments and temperatures below 0°C.
Check for damage, ensure cable is undamaged, do not operate outdoors.
Maintains 55% relative humidity, adjusts intensity based on humidity levels (high, standard, low).
Allows user to set desired humidity (30-80%) or continuous dehumidification (CO).
Table of common faults (e.g., not switching on, stopping) and their possible causes and rectifications.
Specifications including input voltage, power, current, air flow, water tank capacity, dimensions, and weight.
To Next Page