SLE 280 A2
■ 44
│
GB
│
MT
Cleaning
CAUTION
Potential appliance damage!
► Protect the appliance from moisture and from the ingress of fluids.
► To avoid irreparable damage to the appliance, never immerse it in water.
► Always remove the mains plug from the mains power socket before clean-
ing the appliance.
► Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing.
► Do not clean the water tank
5
in a dishwasher. Otherwise, it will be
damaged.
♦ If required, wipe the casing with a slightly damp cloth.
♦ Remove the water tank
5
and pour away the water; then dry the water
tank
5
thoroughly, both inside and out, before replacing it.
♦ In order to clean the inside of the water tank
5
, you must remove the black
lid. To do this, release the carrying handle from the retainer while pressing
it out sideways. Ensure that the pins on the handle line up with the grooves
on the water tank
5
(see fig. 7).
Fig. 7
♦ Now, remove the black lid from the water tank
5
.
♦ To insert, follow the reverse sequence.
♦ It is recommended that the water tank
5
be cleaned regularly every two
weeks to prevent the build-up of mould and bacteria. To do this, fill the
water tank
5
with lukewarm water, adding a standard detergent. Rinse
repeatedly with lukewarm water. In addition, disinfection is recommended
following cleaning. To do this, use a standard, alcohol-based disinfecting
agent or high-proof alcohol. Both substances are completely harmless if
followed by repeated rinsing with lukewarm water.
5
To Next Page
Loading...
