Silvercrest SLE 280 A2 - Technical Information; Product Technical Specifications

SLE 280 A2
■ 48
│
GB
│
MT
Appendix
Technical data
Input voltage 220 - 240V
~
50Hz
Input power 280W
Nominal current 1.3A
Maximum output power 370W
Maximum nominal current 1.7A
Air flow rate 160m³/h
Water tank 7.0l
Intake pressure 1.0MPa
Ejected pressure 2.5MPa
Dehumidification performance /
24h*
20l (at 30 °C / 80% rh)
12l (at 27 °C / 60% rh)
Recommended room size
approx. 20m
2
or approx 46m
3
(at a ceiling height of 2.3m)
Refrigerant R134a
Operating temperature +5 °C to +35 °C
Dimensions approx. 60 x 38 x 28.5cm
Weight approx. 13kg
*The lower the ambient temperature is and the colder the temperature outside
becomes, the less moisture accumulates in the air and flows from outside into the
room to be dehumidified. For this reason, dehumidification performance steadily
decreases when temperatures drop and can come to a standstill. This does not
mean that the appliance is defective.
Information about the refrigerant
This appliance contains fluorinated greenhouse gases that are listed in the Kyoto
Protocol.
The system is hermetically sealed.
Refrigerant: R134a
Fill quantity: 0.135 kg
CO
2
equivalent: 0.193 t
GWP value: 1430