Silvercrest SLE 320 D5 - Selecting Programmes

■ 14
│
GB
│
IE
│
NI
│
CY
SLE 320 D5
Selecting programmes
The appliance has 4 distinct programmes.
♦ Press the
MODE button w repeatedly to set the desired program.
The programme LED q of the set programme lights up.
DRY CLOTHES
You can use this programme to dry damp laundry faster. Move the flap 6 on
the air outlet so that the airflow is directed towards the garments to be dried.
Changes regarding the desired air humidity and the fan level are not possible in
this programme.
TARGET HUMIDITY
This programme offers you the option of setting the desired air humidity level that
should be achieved yourself.
♦ Press the UP arrow z or DOWN arrow u to set the desired humidity
in 5% steps between 30% and 80%. The set value flashes on the display t
for approx. 5 seconds and then the current relative humidity value is shown
again.
As soon as the selected humidity is reached, the
HUMIDITY
REACHED LED a lights up.
Additionally, you also have the option to select the setting
if you want to
make a setting below 30% relative humidity. This setting allows you to achieve
a very low humidity as the dehumidification runs permanently.
To achieve maximum dehumidification, the fan speed must be set high. To do this,
press the
FAN SPEED button e, until the LED h (high) lights up.
NOTE
► The minimum humidity that can be achieved in
mode is dependent on
many factors, such as the room size or the ambient temperature, etc.
Therefore, it is not possible to define a generally applicable minimum value.
FAN FUNCTION
No dehumidification takes place in this programme. The room air is drawn in
through the air inlet, passes through the filter8 and is discharged back into the
room via the air outlet.
♦ Press the FAN SPEED button e to select the desired fan level.
The LEDs g (low) and h (high) indicate which fan level is set.