Silvercrest SLXL 30 C1 - Operation; Overview of Button Functions; Pair with a Bluetooth Device

SilverCrest SLXL 30 C1
English - 11
9. Operation
9.1 Overview of button functions
Button Button function
 Switch device on: press briefly
 Switch device off: Hold down for approx. 3 seconds
 Volume up: press briefly A beep sounds when the maximum volume is
reached.
 Jump to next track: Hold down for approx. 2 seconds
 Volume down press briefly
 Replay current track from the beginning: Hold down for
approx. 2 seconds
 Jump to previous track: When restarting the current track, press and
hold the (2) button again for approximately two seconds
 Play/pause: press briefly
 Activate Bluetooth
®
: press briefly, a beep sounds
 Disconnect Bluetooth
®
connection: press briefly/a new pairing is
then possible immediately
 Activate TWS mode: press briefly
 Deactivate TWS mode: press briefly
9.2 Pair with a Bluetooth
®
device
The AUX IN socket (9) must not be used during the coupling process.
The Bluetooth
®
device name of the speaker is SLXL 30 C1.
Enter ‘0000’ if you are asked for a PIN during the pairing process. The connection may
take a long time to establish, depending on the device used.
• Set your Bluetooth
®
device, such as your smartphone, to search for available Bluetooth
®
devices
nearby. Please consult the operating instructions of your Bluetooth
®
device.
• Briefly press the on/off button (1) to switch the speaker on. A series of beeps will sound and
then the power/charging LED (15) will flash blue. Coupling mode is now active.
• Select device SLXL 30 C1 from the list of found devices to pair the two devices. A series of
beeps will sound and the power/charging LED (15) will light up blue twice once the connection
is successful.