Silvercrest SMPS 7 E1 - Operating the Device

22 GB/IE/NI/CY
 Find a well-lit place to work.
There must be a socket-outlet in
close proximity.
 Insert the appropriate
attachment for your purpose in
the attachment fitting [1]. The
attachment must sit securely.
 Connect the DC plug [8] to the
DC socket [7].
 Plug the power adaptor [9]
into a socket-outlet.
 Switch on the product.
 Select the rotating direction:
Switch [6]
Indicator
light [5]
Rotating
direction
Slide the switch to the left. red clockwise
Slide the switch to the right. green counter-clockwise
Slide the switch to the
middle.
off off
NOTE: The indicator light [5]
flashes when the highest
or lowest setting has been
reached.
 Always start the treatment at
slow speed and only increase it
when necessary.
Speed Press button
Increase speed
Press [2] button.
Reduce speed
Press [3] button.
 Switch off the product: Slide
the switch [6] to 0 position.
 Disconnect the power
adaptor [9] from the socket-
outlet when you have finished
the treatment.