Silvercrest SMPS 7 E1 - Pre-Operation Checks; Changing Attachments Safely

21GB/IE/NI/CY
 Changing the
attachment
 Unplug the main unit [4] each
time before you change the
attachment.
 Pull the attachment out of the
main unit [4], if any.
 Select an attachment (see
fig. A and the “Attachments”
chapter).
 Push the attachment into the
main unit [4]. Make sure the
attachment is installed firmly.
NOTE: Change the
attachment when it looks or
feels worn.
 Operation
m
WARNING! RISK OF
INJURY!
Excessively long or
intensive treatment can
also injure deeper layers
of skin.
Therefore, check the treatment
progress and results regularly.
Diabetics in particular are less
sensitive on their hands and
feet.
m
WARNING! RISK OF
BURNS DUE TO SEVERE
HEAT DEVELOPMENT!
While you are working, never
let the attachments remain in
one location. Friction leads to
increased heat generation and
may cause injuries.
Always work with a circular
motion.