EasyManua.ls Logo

Silvercrest SMPS 7 E1 - Cleaning and Care

Silvercrest SMPS 7 E1
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23GB/IE/NI/CY
NOTE: Set the speed to
the lowest setting after you
changed the rotating direction
or an attachment.
NOTES:
If you have treated hardened
skin, apply a moisturising
cream to the treated areas
after completing the procedure.
The attachments do not have
as much effect on softened
skin. Therefore, do not carry
out any pretreatment in a water
bath before using the product.
Always select the rotating
direction for treating the nails
in their direction of growth. If
possible, treat the nails from
the outside towards the inside
(to the nail tip). Otherwise, the
nails will split more easily.
If you feel that the nails could
crack during treatment, select
the other direction.
Cleaning and care
m
WARNING! Risk of
electrical shock! Before
cleaning: Always disconnect
the power adaptor [9] from the
socket-outlet.
Do not use chemical,
aggressive or abrasive
cleaning agents. These can
damage the surface of the
product.

Related product manuals