What to do if "0-Ld" appears on Silvercrest Scales display?
If "0-Ld" appears on the display of your Silvercrest Scales, it means the appliance is overloaded. To resolve this, remove some weight from the weighing platform.
Why are the readings on my Silvercrest Scales display illegible?
If the readings on the display of your Silvercrest Scales become illegible, it is likely that the batteries are very low. You should replace the batteries to fix this.
Why does "Lo" appear on the display of my Silvercrest SNAW 1000 D2 Scales?
If "Lo" appears on the display of your Silvercrest Scales, it indicates that the batteries are too weak to carry out a weighing. Replace the batteries to solve this issue.
How to fix no output on Silvercrest SNAW 1000 D2 Scales display?
If there is no output on the display of your Silvercrest Scales, it could be due to two reasons: either the plastic strip in the battery compartment has not been removed, or the batteries are dead. Remove the plastic strip from the battery compartment and replace the batteries.
What does "E" mean on my Silvercrest SNAW 1000 D2 display?
If "E" appears on the display of your Silvercrest Scales, it means the permitted maximum values were exceeded. Make sure to observe the maximum values specified in the instructions.
General| Type | Digital kitchen scale |
|---|---|
| Maximum weight | 5 kg |
| Division | 1 g |
| Accuracy | ± 1 g |
| Tare function | Yes |
| Automatic switch-off | Yes |
| Overload indicator | Yes |
| Display | LCD |
| Auto-Off | Yes |
| Platform Material | Glass |
| Maximum Capacity | 5000 g |
| Units | g, oz, lb |
| Power Source | 2 x AAA batteries |
Defines the appliance's purpose for weighing food and monitoring nutrition.
Lists standard components and instructions for checking for transport damage.
Details the function of each button and control on the scale.
Explains the various symbols and readouts on the scale's display.
Clarifies the meaning of standard warning, important, and notice symbols used in the manual.
Highlights critical safety advice regarding medication dosage and scale readings.
Outlines essential precautions to prevent personal injury during the use of the appliance.
Details measures to protect the appliance and surrounding property from damage.
Emphasizes critical safety measures to avoid hazards associated with battery use and disposal.
Provides instructions for initial setup, including removing packaging and placing the scale.
Step-by-step guide on performing basic weighing operations.
Explains the use of the tare function for sequential weighing.
Details how to access and display nutritional information using food codes.
Describes the process for storing measured data and nutritional values for later recall.
Information regarding the environmentally sound disposal of the appliance at its end-of-life.
Presents key specifications and technical details of the nutrition scales.
Explains the necessary steps to initiate and process a warranty claim.
Identifies the importer of the product.
To Next Page
