What to do if "0-Ld" appears on Silvercrest Scales display?
If "0-Ld" appears on the display of your Silvercrest Scales, it means the appliance is overloaded. To resolve this, remove some weight from the weighing platform.
Why are the readings on my Silvercrest Scales display illegible?
If the readings on the display of your Silvercrest Scales become illegible, it is likely that the batteries are very low. You should replace the batteries to fix this.
Why does "Lo" appear on the display of my Silvercrest SNAW 1000 D2 Scales?
If "Lo" appears on the display of your Silvercrest Scales, it indicates that the batteries are too weak to carry out a weighing. Replace the batteries to solve this issue.
How to fix no output on Silvercrest SNAW 1000 D2 Scales display?
If there is no output on the display of your Silvercrest Scales, it could be due to two reasons: either the plastic strip in the battery compartment has not been removed, or the batteries are dead. Remove the plastic strip from the battery compartment and replace the batteries.
What does "E" mean on my Silvercrest SNAW 1000 D2 display?
If "E" appears on the display of your Silvercrest Scales, it means the permitted maximum values were exceeded. Make sure to observe the maximum values specified in the instructions.
General| Type | Digital kitchen scale |
|---|---|
| Maximum weight | 5 kg |
| Division | 1 g |
| Accuracy | ± 1 g |
| Tare function | Yes |
| Automatic switch-off | Yes |
| Overload indicator | Yes |
| Display | LCD |
| Auto-Off | Yes |
| Platform Material | Glass |
| Maximum Capacity | 5000 g |
| Units | g, oz, lb |
| Power Source | 2 x AAA batteries |
To Next Page
