GB
│
CY
│
7 ■
SNAW 1000 D2
Setting up
Place the scales on a level, firm surface. Correct measurement requires a firm
base, as the weight sensors are installed in the 4 silicone feet.
NOTE
► This appliance is provided with non-slip silicone feet. Furniture surfaces may
be made of a variety of materials and are treated with many different types
of cleaning agents. Therefore, it is not possible to entirely exclude the pos-
sibility that some of these materials contain substances that could corrode
and soften the appliance's silicone feet. If need be, place an anti-slip mat
under the silicone feet of the appliance.
Operation
Weighing items
1) Press the ON/OFF button 9 to switch on the scales.
The start display appears briefly, then “0 g” is shown automatically.
CAUTION
Excess or incorrect loads will cause irreparable damage to
the appliance.
► Never place food weighing more than 5 kg (11 lb) on the weighing
plate
. In cases of doubt, first weigh heavy food using more sturdy
scales.
► Do not place any objects or food on the display
or the buttons.
2) If you wish to weigh food without a container, place the food on the weighing
platform 1. The weight is displayed.
If you wish to weigh the food in a bowl/container, first place the empty
bowl/container on the weighing platform 1. Press the TARE 7 button. The
display 3 shows “0 g” q and “T” z appears on the display 3. Place the
food in the bowl/container. The weight of the food is displayed.
Adding further items (tare)
To weigh several different substances (e.g. various ingredients for a dough)
in combination, you can set the scales to 0 each time before adding a further
substance.
■ If you wish to reset the scales to “0 g” after the first measurement in order to
measure the next ingredient, press the TARE button 7. The display 3 shows
“0 g” q and “T” z appears on the display 3.
To Next Page
Loading...
