Silvercrest SNS 45 B4 - Appliance Handling and Operation; Switching the Device On and Off; Operating Modes and Time Settings

SNS 45 B4
■ 16
│
GB
│
IE
│
NI
│
CY
Handling and operation
In this chapter you receive important information for the handling and operation
of the appliance.
NOTICE
► See also the chapter Appliance and Accessories.
Switching On and Off
Ƈ Switch on the UV appliance 1 by pressing the ON/OFF switch 2 to the
position “I”. As soon as the appliance is switched on, the blue points on the
appliance light up.
Ƈ Switch off the UV appliance 1 by pressing the ON/OFF switch 2 to the
position “0”.
Functions
Three different treatment times can be set on the appliance:
■ 90 seconds
■ 150 seconds
■ 240 seconds
Ƈ Press the Start button 4. “90” lights up and the UV lamps switch on.
Ƈ If you want to select another time, press the time selector button (SELECT)
3 repeatedly until the desired time lights up.
NOTICE
► The UV lamps switch off automatically after the lapse of the preset time.
Ƈ Press the start button 4 and the time selector button 3 again as described
above for each further treatment.