SNS 45 B4
■ 22
│
GB
│
IE
│
NI
│
CY
NOTICE
► Should any UV Gel i inadvertantly come onto the cuticle or the nail bed,
remove it before the hardening, for example, with a cotton wool swab.
Ƈ Repeat the above process for all nails.
7
t
NOTICE
► Ensure that the nail is covered evenly with UV Gel i.
Hardening of the UV-Gel
NOTICE
► See also the chapter Handling and operation.
Ƈ Switch on the UV appliance 1 with the ON/OFF switch 2.
Ƈ Press the start button 4.
Ƈ Use the time selector button 3 to select the required treatment time. For the
first hardening we recommend the time setting of 240 seconds.
Ƈ Hold your hand with the nails upward for the duration of the set treatment
time in the opening of the UV appliance 1.
Ƈ Treat the thumbnail separately because, when you hold your hand in the UV
appliance 1, the UV light only shines on the side of it.
Ƈ Repeat the application of the UV gel i and the hardening in the UV
appliance 1 as described above.
NOTICE
► To improve the stability of the nails, apply several thin coats of UV gel i
and harden them each separately.
To Next Page
Loading...
