Silvercrest SOPE 650 A1 - Cleaning

GB
│
IE
│
35 ■
SOPE 650 A1
Cleaning
DANGER!
► Pull out the plug from the mains power socket before cleaning the appliance.
► Never immerse the appliance and mains cable 1 in water.
WARNING!
► Parts of the appliance become hot during operation! Allow the appliance
to cool sufficiently before cleaning it!
CAUTION! PROPERTY DAMAGE!
► Do not use caustic or abrasive cleaning agents. These can damage the
surfaces of the appliance.
NOTE
► It is best to clean the appliance as soon as it has cooled down, otherwise
food residues can dry out and then be difficult to remove.
► Clean the appliance regularly as described in this section to prevent mould
growth.
►
The funnel  and lid , press screw  and press screw housing ,
pulp and oil containers  and also the filter -are all suitable
for cleaning in the dishwasher. If possible, place the plastic parts in the
upper basket of the dishwasher and make sure that they are not jammed.
♦ Disassemble the appliance as described in the section ”Assembling/
dismantling the appliance”.
♦ If necessary, clean the motor unit 6 and the mains cable 1 with a damp
cloth. For stubborn stains, apply a mild detergent to the cloth and wipe off
with a cloth moistened only with water.
♦ Clean the remaining parts thoroughly in warm water with a mild detergent.
Use the supplied cleaning brush % to clean hard-to-reach areas.
♦ Dry all parts thoroughly before reusing or storing them.
Storage
♦ Clean the appliance as described in the section ”Cleaning”.
♦ Store the appliance and its accessories in a clean, dry place.