Silvercrest SPLB 44 A1

■ 40
│
GB
│
IE
SPLB 44 A1
Pairing the device with a Bluetooth
®
playback device
To play audio files via Bluetooth
®
, the party loudspeaker must previously have
been paired with a compatible Bluetooth
®
playback device.
♦ Set the main switch
to the position to switch the device on.
appears briefly on the device display .
♦ Press the
button repeatedly until and are shown on the
display . You will hear a sequence of beeps and the Bluetooth
®
LED
flashes blue. The device is ready to be paired with a Bluetooth
®
playback device. The Bluetooth
®
function is activated automatically on
first use.
♦ Set the Bluetooth
®
playback device so that it scans for Bluetooth
®
devices. A detailed description of how to do this can be found in the
operating manual for your Bluetooth
®
playback device.
♦ Select the entry
from the list of found devices on your
Bluetooth
®
playback device and, if required, enter the code to
connect the two devices. If the pairing is successful, you will hear a beep
and the Bluetooth
®
LED flashes blue.
NOTICE
► The next time you turn on the party loudspeaker, it will connect automati-
cally to the most recently connected Bluetooth
®
playback device. If your
Bluetooth
®
playback device does not automatically reconnect to the
party loudspeaker, you will have to manually re-establish the connection to
your Bluetooth
®
playback device. A detailed description of how to do
this can be found in the operating manual for your Bluetooth
®
playback
device.
► If you want to connect the device to another Bluetooth
®
device, start by
pressing the
(Bluetooth
®
) button for about 2 seconds to disconnect
the currently connected Bluetooth
®
playback device from the device.
Alternatively, you can deactivate the Bluetooth
®
function on the connected
Bluetooth
®
playback device. You will hear a beep and the Bluetooth
®
LED
flashes blue. The device is now ready to be paired with another
Bluetooth
®
playback device.
► If you use a smartphone as your Bluetooth
®
playback device, the audio
playback will be paused when there is an incoming call. Acceptance/termi-
nation of the call is carried out via the smartphone. After finishing the call,
playback of the audio file will resume automatically.
► During music playback in Bluetooth
®
mode, the basic functions can be
operated using the
, and
buttons on the device.
► Note that while in Bluetooth
®
mode, you can also set the volume using
the Bluetooth
®
playback device.