Silvercrest SPLB 44 A1

GB
│
IE
│
41 ■
SPLB 44 A1
NOTICE
► If playback sounds distorted, reduce the volume on the Bluetooth
®
playback device.
► Depending on the Bluetooth
®
playback device being used and the
operating system, it is possible that not all functions will be supported.
► In an environment with high-frequency interference, you may experience
noise interference during music playback in Bluetooth
®
mode. As soon
as the interference no longer exists, music playback should automatically
continue in Bluetooth
®
mode without any further problems.
Connecting the microphone
You can connect up to two microphones simultaneously. One microphone is
supplied with the product. You can purchase a second suitable microphone from
a specialist dealer. The microphones function in all the operating modes. The
volume of the microphone can be adjusted independently of the music playback
volume. You can give a speech, with accompanying music playback if required,
or you can use the microphones to sing karaoke, for example.
♦ Set the main switch to the position to switch the device on.
♦ Connect the 6.3 mm jack plug
on the microphone to one of the two
6.3mm jack sockets / .
♦ If required, connect a second microphone to the free 6.3 mm jack socket
or .
♦ In each case, slide the On/Off switch
to position to switch
a microphone on.
♦ Adjust the volume for the microphone using the
dial .
♦ Press the
button to activate the echo function. appears
on the display .
♦ Press the
button again to deactivate the echo function.
goes out on the display .
NOTICE
► The echo function does not influence music playback, but only applies
during microphone use.
♦ Press the
button until the required operating mode is displayed.
♦ If required, adjust the music playback volume using the
dial
or mute the sound.
♦ In each case, slide the On/Off switch
to position to switch
a microphone off.