Silvercrest SPPB 5000 A1 User Manual

SPPB 5000 A1
■ 8 │ GB│IE│NI
Disposal of the packaging
The packaging protects the device from damage during
transport. The packaging materials have been selected
for their environmental friendliness and ease of
disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw mate-
rials and reduces the amount of waste that is generated. Dispose
of packaging materials which are no longer needed in accordance
with applicable local regulations.
Charging the power bank
Before using the power bank, the integrated battery must be fully
charged.
CAUTION
► The power bank must never be charged and used for charging
a mobile device at the same time. The mobile device could
be damaged.
► Due to the high battery capacity and bearing in mind the
charging time, the power bank must be charged using a USB
mains adapter.
► Use only a USB mains adapter with an output voltage of 5V
and an output current of at least 2.1A to charge the power
bank.
► Use only the supplied charging cable
to charge/dis-
charge the power bank!
► Always disconnect the charging cable
after charging/
discharging!
♦ Connect the USB plug of the charging cable
to a suitable
a USB power supply (not supplied).
IB_286204_SPPB5000A1_DE-95x140_LB6.indb 8 24.05.17 16:26

Silvercrest SPPB 5000 A1 Specifications

General

Brand	Silvercrest
Model	SPPB 5000 A1
Category	Accessories
Language	English