Why is the time and date not setting automatically on my Silvercrest Radio?
If your Silvercrest Radio is not automatically setting the time and date, it may be due to a weak RDS signal. Fully extend the telescopic aerial 0 and try repositioning it or moving the radio to a different location to improve reception.
What to do if the display is blank on my Silvercrest Radio?
If there is nothing on the display of your Silvercrest Radio, ensure that the mains adapter is correctly connected to both the mains adapter connection w and a functioning mains socket. Also, check the house fuses to confirm that the mains socket is receiving power.
What to do if my Silvercrest SRH 5 A1 Radio has no sound?
If your Silvercrest Radio is producing no sound, first ensure the device is switched on by pressing the button 2. Then, check the volume level using the VOLUME | ENTER / SCAN dial 6 to increase it from minimum. If you are in AUX mode, verify that the external playback device is turned on and not muted. Finally, confirm that the audio cable is correctly connected to the AUX IN connection r.
How to fix interference with radio reception on Silvercrest SRH 5 A1?
If you are experiencing interference with the radio reception on your Silvercrest Radio, the radio reception may be too weak. Fully extend the telescopic aerial 0. You can also try improving reception by repositioning the telescopic aerial 0 or moving the radio to another location.
General| Brand | Silvercrest |
|---|---|
| Model | SRH 5 A1 |
| Category | Radio |
| Tuner | FM/AM |
| Frequency Range | FM: 87.5 - 108 MHz, AM: 522 - 1620 kHz |
| Headphone Jack | 3.5 mm |
To Next Page
