Charging the battery
The battery should be charged for at least 60 minutes
before first use.
Ensure that the appliance is switched off before charging
the battery.
1)
P
lug the connector w into the voltage connection 0
on the shaver.
2) Plug the power plug q into a socket that is com-
patible with the appliance specifications. While the
battery is charging, the red charge indicator light 9
lights up.
♦ As soon as the battery is fully charged, the green
power light 8 flashes. Disconnect the appliance
from the power source.
The green power light 8 turns off.
♦ Once the battery is fully charged, you can use the
appliance for approximately 60 minutes without
connecting it to the power supply.
♦ If the red indicator light 9 flashes, the battery
charge level is too low. Recharge the battery case.
To Next Page
Loading...
