3) After you finish trimming, press the on/off switch 6
back to its initial position.
4) Clean the long hair trimmer 3 with the supplied
brush e. For a more thorough cleaning, read the
section "Cleaning and care".
Cleaning and car
e
Before cleaning the device, discon-
nect the power plug q from the power socket! There is
risk of electric shock!
Do not use abrasive, chemical or
caustic cleaning agents to clean this appliance. This will
irreparably damage the appliance.
Cleaning with the brush
Cutter block
Clean the 3 shaving heads of the cutter block 2 after
every shave using the brush e.
1) Press the release button 4 so that the cutter block 2
pops open/can be folded back.
2) Tap the cutter block 2 on a flat surface or blow off
the hair trimmings.
3) Use the brush e to remove any remaining hair
trimmings.
To Next Page
Loading...
