Silvercrest SRR 3.7 C3 User Manual

■ 12
│
GB
│
IE
│
NI
│
CY SRR 3.7 C3
NOTE
► The best results are achieved if used on dry skin.
► It can take 2 to 3 weeks until the skin is accustomed to the
dry shaving system.
4) Move the shaving heads with straight and circular motions over
the skin.
5) After you have covered all the areas you want to shave, use the
On/Off switch
 again to turn off the appliance. The blue
control lamp  goes out.
6) Clean the shaver after every use with the supplied brush !. For a
more thorough cleaning, read the section “Cleaning and care”.
Shaving with mains voltage
CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
If you want to use the shaver without previously charging it, you can
also use it directly with mains voltage:
1) Plug the connector 3 into the mains connection  on the shaver.
2) Plug the mains adapter - into a mains socket that complies with
the appliance specifications. While the battery is charging, the
red charge indicator light
 flashes.
You can then use the shaver as described in the section “Cordless
shaving”.

Silvercrest SRR 3.7 C3 Specifications

General

Brand	Silvercrest
Model	SRR 3.7 C3
Category	Electric Shaver
Language	English