Silvercrest SRR 3.7 C3 User Manual

GB
│
IE
│
NI
│
CY
│
13 ■
SRR 3.7 C3
Trimmer/long hair trimmer
To shape your beard, form sideburns or shave eyebrows, use the
long hair trimmer .
1) To do this, push the catch  towards the long hair trimmer .
The long hair trimmer  flips out.
2) Press the On/Off switch
. The shaver starts the cutting unit 
and the long hair trimmer , the blue control lamp  lights up.
3) Once you have finished trimming, press the On/Off switch 
again to turn off the appliance. The blue control lamp 
goes out.
4) Clean the long hair trimmer  with the supplied brush !. For a
more thorough cleaning, read the section “Cleaning and care”.
Cleaning and care
DANGER – ELECTRIC SHOCK!
► Before cleaning the device, disconnect the mains adapter -
from the mains power socket! There is a risk of electric shock!
CAUTION! MATERIAL DAMAGE!
► Do not use abrasive, chemical or caustic cleaning agents
to clean this appliance. This will irreparably damage the
appliance.
Cleaning with the brush
Cutting unit
Clean the 3 shaving heads of the cutting unit  after every shave
using the brush !.
1) Take hold of the cutting unit with three fingers in the grip
recesses and pull it off.

Silvercrest SRR 3.7 C3 Specifications

General

Brand	Silvercrest
Model	SRR 3.7 C3
Category	Electric Shaver
Language	English