Silvercrest SRR 3.7 C4 - Operating the Shaver; Charging the Battery with Charger

GB
IE
10
SRR 3.7 C4
Charging the rechargeable battery with the
charger
The battery should be charged for at least 60 minutes before first
use.
NOTE
► Ensure that the appliance is switched off before charging the
battery.
1) Plug the connector 3 into the charging socket % of the charger.
Pay heed to the correct polarity: The guide pillar in the charging
socket % must grip the guide rail on the connector plug 3.
If it does not, the connector plug 3 cannot be inserted.
2) Flip open the charger 6 as far as it will go until the bracket is
in an upright position (see figure).
3) Plug the mains adapter ! into a mains socket that complies with
the appliance specifications.
4) Place the appliance in the charger 6. The bracket holds the
appliance in place in the charger 6.
The charging of the battery is indicated by the red flashing
symbol
9.