Silvercrest SRR 3.7 C4 - Charging without Charger

11
SRR 3.7 C4
GB
IE
■
As soon as the battery is fully charged, the red flashing symbol
disappears and the blue symbol
of the battery charge
indicator appears.
■ Once the battery is fully charged, you can use the appliance for
around 60 minutes without connecting it to the power supply.
■ If the battery is nearly empty, the red symbol
 flashes.
Charging the rechargeable battery without
the charger
NOTE
► Ensure that the appliance is switched off before charging the
battery.
1) Plug the connector 3 into the charging socket - on the shaver.
Pay heed to the correct polarity: The guide pillar in the charging
socket - must grip the guide rail on the connector plug 3. If it
does not, the connector plug 3 cannot be inserted.
2) Plug the mains adapter ! into a mains socket that complies with
the appliance specifications. 
The charging of the battery is indicated by the red flashing
symbol
.
■ As soon as the battery is fully charged, the red flashing symbol
disappears and the blue symbol
of the battery charge
indicator appears.
■ Once the battery is fully charged, you can use the appliance for
around 60 minutes without connecting it to the power supply.
■ If the battery is nearly empty, the red symbol
 flashes.