Silvercrest SRR 3.7 C4 - Shaving with Mains Adapter; Using the Trimmer;Long Hair Trimmer

13
SRR 3.7 C4
GB
IE
Shaving using the mains adapter
CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
Should you wish to use the shaver without first charging the battery,
you can do so by using energy directly from the mains adapter !:
1) Plug the connector 3 into the charging socket - on the shaver.
Pay heed to the correct polarity: The guide pillar in the charging
socket - must grip the guide rail on the connector plug 3. If it
does not, the connector plug 3 cannot be inserted.
2) Insert the plug into a mains power socket.
The shaver can then be used.
Trimmer/long hair trimmer
To shape your beard, form sideburns or shave eyebrows, use the
trimmer unit .
1) Pull the cutting unit , if attached, off the handset.
2) Fit the trimmer unit  onto the drive shaft (see figure).
3) Attach the trimmer unit  in such a way that both guide pillars
on the trimmer unit  grip the guide rails on the drive shaft .