6
GB
5.3 Overview - Connections
CAUTION: make sure that the soundbar and the devices
to be connected are switched off before you connect them.
Please also read the user instructions for the devices which
you are connecting.
NOTES:
• An HDMI (ARC) cable for the
HDMI (ARC)
|
10
input and
a 3.5 mm stereo jack cable for the
LINE IN
|
7
input are
not included in the items supplied.
•The HDMI (ARC)|10 connection is only able to func-
tion if all components are ARC-enabled. If necessary,
old HDMI cables must be replaced with new ARC-ena-
bled ones.
• A subwoofer can be connected to the cinch socket of
the SUB OUT|6 output. This is automatically con-
trolled by the device.
5.4 How to use
NOTE: the device remains in standby mode after being
switched off. In this mode, the power consumption of the
device is low. Pull the power unit|11 out of the wall socket
to disconnect it from the mains.
• Connect the power unit|11 with an easily accessible
wall socket. The display|1 shows – –. The device is
now in standby mode.
6. Operation
NOTES:
• All adjustments can be conveniently carried out with
the remote control. The basic functions can also be car-
ried out with the buttons on the device. Operation of
the device in the instructions is usually described with
the remote control.
• The device switches to standby mode …
…if no Bluetooth
®
connection is established within
20|minutes or
…if either no signal or only a very weak signal is re-
ceived for approx. 20 minutes, and the controls
have not been used.
• Press the button |32 to switch on the device from
standby mode.
• Press the button |32 to switch the device into standby
operation.
6.1 Selecting the type of connection
1. Press one of the AUX|31, LINE IN|29, HDMI
(ARC)|17, OPTICAL|18 or buttons|30 to switch to
the desired connection (see “Overview - Connections”
on page 6).
2. On the audio device you can now start playback and
select and control the music tracks.
6.2 Sound settings
NOTE: Changes in the sound settings are shown on the
display|1.
- Volume: V00 … V40
- Treble sounds: t -4 … t 4
- Bass sounds: b -4 … b 4
Controlling the volume
• During playback, press the VOL –/+|22 buttons on
the remote control or VOL –/+|4 on the device. For a
faster change of the volume, you can also keep the
buttons pressed.
Muting the device
1. Press the button |16 to mute the volume. The volume
previously set will flash on the display|1.
2. To switch the sound back on, press the button
|
16
again or one of the
VOL –/+
|
22
/
|
4
buttons.
Input Use
Remote
control
button
Display
AUX IN|8
Connection with ste-
reo cinch cable|
13
,
e.g. television set,
CD player
AUX|31 AUX
LINE IN|7
Connection with
3.5 mm stereo jack
cable, e.g.
MP3
player, telephone
LINE IN|29 LInE
HDMI
(ARC)|10
Connection with
HDMI (ARC) cable,
e.g. to the HDMI
ARC connection of
the television set,
DVD player
HDMI
(ARC)|17
Hd
OPTICAL
IN|9
Connection with
TOSLINK cable|
14
,
e.g. to digital receiv-
er, DVD player
OPTICAL|18 OPtI
Bluetooth
®
Radio connection,
e.g. smartphone
|30
bt
To Next Page
Loading...
