Silvercrest SSMP 2000 A1 User Manual

9
GB
• Turn the control dial11 first to posi-
tion0 (Off) and then back to position M
to reactivate the button functions.
3. To chop harder food, press button
P14. Work with pulses (press button
P14 repeatedly). The number and
length of the pulses will depend on the
quantity and consistency of the food. All
3 buttons 12, 13 and P14
flash blue.
Crushed Ice
1. Fill ice cubes into the blender jug5.
2. Turn the control dial11 to position M.
All 3 buttons 12, 13 and P14
flash blue.
3. Press the button 13. Now, the de-
vice operates with interval function.
Button 13 lights up in blue. The de-
vice will switch off automatically.
Smoothies
This function is used to prepare smoothies.
1. Turn the control dial11 to position M.
All 3 buttons 12, 13 and P14
flash blue.
2. Press the button 12. The speed in-
creases and decreases several times
during the mixing process. Button
12 lights up in blue. The device will
switch off automatically.
7.3 Remove food
NOTE: do not store foodstuffs in the blender
jug5 or in contact with other product parts
for longer than 24 hours. This also applies
to storage in the refrigerator.
1. Turn the control dial11 to position 0
(Off).
2. Once the motor has come to a com-
plete standstill, remove the blender
jug5 from the motor block9. Lift the
blender jug5 vertically upwards.
3. Figure C: remove the safety bracket4
from the locking device and press the
lid3 upwards.
4. Empty the blender jug5.
5. Clean the device as soon as possible
after use.
8. Cleaning
Clean the device prior to its first use!
8.1 Instant cleaning of the
blender jug
1. Position the blender jug5 on the motor
block9 so that the handle6 points to
the right.
2. If necessary, turn the control dial11 to
position 0 (Off).
3. Fill some warm water and detergent into
the blender jug
5 .
4. Close the blender jug5 with the lid3
such that the safety bracket4 engages
audibly at the handle6.
5. Connect the mains plug10 with the
wall socket.
6. Turn the control dial11 to position M.
7. Press the button P14 repeatedly.
8. Turn the control dial11 to position 0
(Off).
9. Disconnect the mains plug10 from the
wall socket.
10. Once the motor has come to a com-
plete standstill, remove the blender
jug5 from the motor block9. Lift the
blender jug5 vertically upwards.
11. Figure C: remove the safety bracket4
from the locking device and press the
lid3 upwards.
12. Empty the blender jug5 and rinse it
with clean water.
BB&3(B%ERRN6HLWH0LWWZRFK$SULO

Silvercrest SSMP 2000 A1 Specifications

General

Brand	Silvercrest
Model	SSMP 2000 A1
Category	Blender
Language	English