Silvercrest SSRM 10 A1 User Manual

SilverCrest SSRM 10 A1
English - 17
Please note that already occupied presets are
overwritten.
Manual station scan
 Switch on the scan radio with the "On/Standby" button (6).
 Press the "MODE" button (3). The "FM" symbol (11) flashes on
the display.
 Press the "-" button (2) or "+" button (4) for approx. 2 seconds
to start the manual station scan downwards or upwards. As
soon as the device finds a station with a strong signal, the scan
stops and the station is played.
 If you want to switch to another station, press the "-" button (2)
or "+" button (4) again for approx. 2 seconds to restart the
manual station scan downwards or upwards. The device
searches for the next station with a strong signal.
 To exit scan mode, press the "MODE" button (3) again. The
"FM" symbol (11) now lights up again permanently.
Manual station tuning
As an alternative to the automatic or manual station scan, you
can also tune in stations manually. This enables you to find
stations with weaker signals also. Proceed as follows:
 Switch on the scan radio with the "On/Standby" button (6).
 Press the "MODE" button (3). The "FM" symbol (11) flashes on
the display.
 Briefly press the "-" button (2) or "+" button (4).

Silvercrest SSRM 10 A1 Specifications

General

Brand	Silvercrest
Model	SSRM 10 A1
Category	Radio
Language	English