■ 10
│
GB
│
IE SSSM 600 A2
1) Prepare the ingredients.
2) Add the ingredients to the blender jug
8. Always add liquid ingredients
before more solid ingredients, such as fruit and/or crushed ice. Add light
ingredients, such as lettuce, last.
NOTE
►
Do not use the appliance to crush ice cubes! Only used pre-crushed ice in
the appliance.
Operating the appliance
Once you have filled the blender jug 8 and connected the smoothie maker
6/7/8 to the motor unit 4 (see section "Assembly"), proceed as follows:
NOTE
► Do not start the appliance until the blade holder
6 with the blade 7,
blender jug
8 and motor unit 4 have been correctly assembled.
CAUTION! PROPERTY DAMAGE!
► To turn the blade holder
6, only hold the blade holder 6. Never turn
the blender jug
8 while operating the appliance! Otherwise the blender
jug
8 will detach and the ingredients will spill out!
NOTE
► If you want to prepare a smoothie, turn the assembled appliance around so
that the blender jug
8 is facing upwards. This way, you can make sure that
the blade
7 constantly processes the ingredients and that the blade 7
does not run empty!
1) After filling the blender jug
8 and after assem-
bling the appliance, insert the power plug into
the mains socket.
2) Turn the appliance over so that the motor unit
4
and the speed control
1 face downwards and
the blender jug
8 is facing upwards.
Place the motor unit
4 on a stable surface.
3) Hold the blender jug
8 firmly with one hand.
4) Hold down the button 2 to blend the food
into a smoothie at normal speed. Turn the speed
control
1 towards "Max" to increase the speed.
Turn the speed control
1 towards "Min" to
decrease the speed.
To Next Page