Silvercrest SST 40 A1 - Disposal of the Packaging; Appendix and Specifications; Technical Specifications

■ 18
│
GB
│
IE
│
NI
│
CY
SST 40 A1
Disposal of the packaging
The packaging materials have been selected for their environmental friendliness and
ease of disposal and are therefore recyclable. Dispose of packaging materials that
are no longer needed in accordance with the applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging materials and separate the packaging materials
for disposal if necessary. The packaging materials are labelled with abbreviations (a)
and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard, 80–98: composites.
Appendix
Technical specifications
Mains adapter
Manufacturer
KOMPERNASS H. GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
Commercial register number:
HRB 4598
Model SST 40 A1-2
Input voltage 100–240V ∼ (AC)
Input AC frequency 50/60Hz
Output voltage 42.0 V
(DC)
Output current 0.4 A
Output power 18.1 W
Average operating efficiency 85.3 %
Low load efficiency (10%) 83.2 %
No-load power consumption 0.07 W
Input current max. 0.5 A
Protection class
II /
(double insulation)
Polarity
(positive inside, negative
outside)
Energy efficiency class
6
VI
Short-circuit proof safety transformer
Switched-mode power supply
IB_329834_SST40A1_GB-IE-NI-CY.indb 18 24.09.2021 08:56:52