Silvercrest SSTB 10 C2 - Advanced Remote Functions; Switching Device On and Off

GB
│
IE
│
31 ■
SSTB 10 C2
Button Function
– Press to mute playback.
AUX
– Press to activate the AUX mode.
– Press to switch on the Bluetooth
®
function.
Music
Movie
Flat
– Press to activate one of the three preset sound pro-
grammes. The
BASS +, BASS −, TREBLE + and
TREBLE −
buttons are inactive.
Indiv.
– Press to activate the individual sound programmes.
The
BASS +, BASS −, TREBLE + and TREBLE −
buttons are active.
BASS +
– Press to increase the bass tones.
BASS −
– Press to decrease the bass tones.
TREBLE +
– Press to increase the treble tones.
TREBLE −
– Press to decrease the treble tones.
Switch the device on/off
On the device
♦ Briefly press the / FUNC. button to switch the device on.
The message +,appears briefly on the display and then the most recently
used operating mode ($8; or E/8() is shown.
♦ Press the
/ FUNC. button for about 2 seconds to switch off the device. The
message 2)) appears briefly on the display .
With the remote control
♦ Press the button to switch on the device.
♦ Press the button again to switch off the device.