Silvercrest SSVM 40 B1 - Operation and Adjustments; General Operation Guidelines; Assembly Preparation

18 GB/MT
mWARNING! Risk of electric
shock! Ensure the rated voltage
shown on the rating label
corresponds with the voltage of
the power supply.
mWARNING! Risk of electric
shock! If the supply cord is
damaged, it must be replaced by
the manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Operation
 Only use the product in dry
indoor rooms.
 Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping and
splashing water.
mCAUTION! Risk of injury!
Ensure that the fan is switched
off from the supply mains before
removing the guard.
mCAUTION! Risk of injury!
Never use the product without the
safety grille or with a damaged
safety grille.
mCAUTION! Risk of injury!
During use, keep hands, hair,
clothing and utensils away from
the safety grille to avoid injuries
and damage of the product.
 No action is needed from users to
shift the product between 50and
60Hz. The product adapts itself
for both 50 and 60Hz.
 Before use
 Unpacking
 Remove the packaging. Check if the product is
damaged.
 Assembly
 Accessory needed: Cross head screwdriver
 Number of persons needed for assembly: 1 adult