■ 6 │ GB
│
IE
│
NI
│
CY
SSVS 1000 B2
CAUTION – PROPERTY DAMAGE!
► Do not add any foods to the water bath unless they are
firmly sealed. Any water getting into the food will produce
unfavourable results or spoil the food.
► Ensure that the appliance, the mains cable and the plug do
not come into contact with heat sources such as hotplates or
naked flames.
► Never place the appliance near sources of heat.
► Never open the housing. If you do, it can no longer be as-
sured that the appliance is safe, and the warranty will be
invalidated.
► Allow the appliance to cool down completely before clean-
ing and stowing it away it.
► In the case a malfunction occurs on the appliance, an error
code will blink on the display. When the error codes "Er1",
"Er2", "Er3" or "Er6" are displayed, switch off the appliance
immediately, pull the mains plug out of the socket and con-
tact the Service Hotline (see Section Service).
The error code display "Er4" informs you that the appliance
is not in the water. Handle the appliance as described in
the Section Preparing the appliance. The error code
display will then go out.
To Next Page
Loading...
