Silvercrest STKK 16 B1 - Page 21

STKK 16 B1
■ 18
│
GB
│
IE
│
NI
♦ Write on one of the nameplates e. If marking
the nameplatee by hand, we recommend
using a waterproof pen.
♦ Pull the nameplate cover 9 upwards away from
the transmitter and place your nameplate8
into the recess in the transmitter.
♦ Place the nameplate 9 back onto the transmitter.
♦ Place the transmitter on the wall bracket0 so
that the retaining tabs on the wall bracket0
protrude into the two openings on the back of
the transmitter. Then slide the transmitter towards
the ringer button7 so that the retaining tabs
glide into the openings and the transmitter sits
firmly on the wall bracket0 (see fig. 2).
Fig. 2
IB_373415_STKK16B1_LB6_GB-IE-NI.indb 18IB_373415_STKK16B1_LB6_GB-IE-NI.indb 18 13.09.2021 13:38:1513.09.2021 13:38:15