25GB/IE/NI
NOTE:
If the headphones have already been paired to each
other, the right headphone is already connected to the left and
flashes white only.
Pairing the headphones to each other
To hear sound through both headphones in stereo, they must be
paired to each other.
When you remove the headphones from the charging ports [8],
they automatically pair.
If the headphones do not pair to each other, reset them to the
default settings (see “Reset”).
When the headphones are paired to each other and are
awaiting connection to a Bluetooth device, the master
headphone flashes red / white and the secondary headphone
white only.
NOTE:
The secondary headphone connects to the master
headphone only. The master headphone connects to the
Bluetooth device.
Pairing the headphones with a
Bluetooth device via Hall Switch function
Pairing headphones automatically
Open the lid of the charging/storage box[7]. Both
headphones[1] will be switched on and paired automatically.
The indicator LED[2] on the master headphone flashes red/
white.
To Next Page
Loading...
