Silvercrest STSK 2 G8 - Establishing Bluetooth Connection

26 GB/IE/NI
The indicator LED on the secondary headphone flashes white
only.
This means that the secondary headphone is paired with the
master headphone.
Alternative headphone pairing method
 Remove the headphones from the charging ports [8].
 When the headphones are ready to pair, the indicator LED on
the master headphone flashes red/white.
NOTES:
 If the headphones have already been paired to each other,
the secondary headphone is already connected to the master
headphone and flashes white only.
 A signal sounds once the headphones are paired to each other.
Establishing Bluetooth connection
Once the headphones are paired with each other:
 On your Bluetooth playback device, search for a product
named STSK2G8 and pair with the product.
 If your Bluetooth device prompts you to enter a password,
enter0000.
 A signal sounds when the Bluetooth connection is established.
 Reset
To reset the headphones [1], follow below steps:
 Deactivate the Bluetooth connection on your playback device
to disconnect the headphones[1] from your playback device.
Follow the user manual of your playback device.