SilverCrest SURQ 4 A1
30 - English
12. Storage when not in use
If the clock radio is not to be used for an extended period, store it in a clean, dry and cool place.
13. Troubleshooting
The device does not switch on
• Check that the power adapter (B) is firmly plugged into the mains socket and the connector from
the power adapter cable is securely plugged into the power adapter connection (20) on the
radio.
• Check whether the power socket is live.
No radio reception, poor radio reception
• Unwind the wire antenna (17) completely and try to align it better for optimum reception.
• Tune in the station correctly. If necessary, start a new station search.
Time not set automatically
• Unwind the wire antenna (17) completely and try to align it for optimal reception.
• Set the clock manually.
Device switched on but no sound
• Check the volume setting.
• Please check if you have connected headphones and, if so, disconnect them.
• Please check if the correct operating mode has been selected.
Mobile device not charging on the Qi charging base (16).
• Check whether your mobile device supports the Qi standard.
• Place your mobile device centrally on the Qi charging base (16) with the screen facing upwards.
• If you have fitted one, remove the case from your mobile device before charging.
The [ ] symbol (30) is flashing rapidly on the display (1).
• Check whether there is a metallic object on the Qi charging base (16) and remove it if so.
• Check that your mobile device is the right way up on the Qi charging base (16) (with the screen
facing upwards).
To Next Page
Loading...
Need help?
General
