Silvercrest SWEW 750 B3 - Exchanging the removable plates; WARNING! RISK OF ELECTRIC SHOCK; WARNING! RISK OF INJURY!

GB
│
IE
│
25 ■
SWEW 750 B3
Exchanging the removable plates
You can choose between 3 different removable plates:
– Removable plates “Doughnut”: for baking doughnuts.
– “Waffles” removable plates: for making waffles.
– “Patterned waffles” removable plates: for preparing hollow patterned
waffle halves which can then be filled and fitted together.
WARNING! RISK OF ELECTRIC SHOCK
► Disconnect the plug from the mains power socket before exchanging the
removable plates.
WARNING! RISK OF INJURY!
► Let the appliance cool down before exchanging the removable plates!
Risk of Burns!
NOTE
► When using the “patterned waffles” removable plates, please always ensure
that the top removable plate is installed in the top section of the appliance
and that the bottom removable plate is installed in the bottom section of the
appliance. Use the illustrations in the fold-out page for orientation.
Placement of the removable plates
1) Open the waffle iron by releasing the lid locking device  and lifting the lid.
2) Upper removable plate: First slide the lower latches  into the lower mount-
ings .
3) Now press the upper latches  onto the locking devices , so that the
upper latches  spring under the locking devices  and the removable
plate is firmly seated.
4) Lower removable plate: First slide the rear latches  into the rear mountings .
5) Now press the front latches  onto the locking devices  so that the
latches  spring under the locking devices  and the removable plate is
firmly seated.
6) Press firmly once in the centre of the lower removable plate to ensure that it
is securely inserted.