Silvercrest SWR 300 A1 - WDS and WPS Configuration Menu

SilverCrest SWR 300 A1
English - 71
WDS
Multiple Wireless Access Points can be connected together using WDS (Wireless
Distribution System) in order to achieve larger network coverage. To save the settings, click on
Apply Settings. If the settings are not to be applied, click on Discard Changes.
WPS
The configuration via WPS, using the WPS button on the device, is described in the section
"Configuring the wireless repeater with the WPS function". Here you can see the settings and
configure them via the menu. To save the settings, click on Apply Settings. If the settings are not
to be applied, click on Discard Changes.