SilverCrest SWR 300 A1
English - 77
There is no wireless connection established between the router and the wireless
repeater.
The wireless repeater is too far away from the router; reduce the distance.
The router's wireless function is deactivated; activate the wireless function.
The wireless repeater's configuration is incorrect; reconfigure the wireless repeater, preferably
with the WPS function.
No wireless connection can be established between the computer and the
wireless repeater.
The computer is too far away from the wireless repeater; reduce the distance.
The computer's wireless function is deactivated; activate the wireless function.
Cleaning / maintenance
It is necessary to service the device if it has been damaged in any way, for example, if the housing
is damaged, if liquid or objects have penetrated the device or if the product has been exposed to
rain or moisture. Maintenance work is also necessary if the device is not working correctly or has
been dropped. If smoke is produced, or there are any unusual sounds or smells, disconnect the
device from the mains immediately. In such cases, the device should not be used until it has been
inspected by authorised service personnel. Only let qualified personnel carry out the maintenance
work on the device. Never open the housing of the device. There is the risk of a fatal electric shock
when the housing is open. Only use a clean, dry cloth for cleaning and never use any corrosive
liquids.
To Next Page
Loading...
Need help?
General