Silvercrest swv 733 a1 - WAN Settings

SilverCrest SWV 733 A1
310 - English
WAN settings
The WAN settings are displayed only if
the dual-band wifi range extender was
configured in Router mode. The
following options can be selected:
 Static IP (Internet service providers offer a fixed IP address) – the IP address must be
fixed with this option. Contact your Internet service provider for the IP address.
 Dynamic IP (automatically get an IP address) – the IP address is assigned automatically
by the Internet service provider with this option. No further entries are required here.
 PPPoE (DSL/cable modem dial-up) – you must specify the user name and password for your
Internet service provider with this option. Contact your Internet service provider for the user name
and password.